PowerCycle means, switching OFF the external power supply to the device for a minute and powering it back ON.
For OBD installation, this means:
a. Remove the OBD power supply to the Camera.
b. Wait for 1 minute, to ensure that the device loses complete power and shutdown.
c. Power back ON the camera by connecting the Camera.
d. Once the device is powered back ON, observe the LED pattern, it should blink GREEN once every 15 seconds (implying that the device is running a proper trip with network connection). Please find the LED pattern details here for K245 and here for Jimi.
For 3-wire Installation, this means:
a. Remove the B+ supply to the camera.
b. Wait for 1 minute, to ensure that the device loses complete power and shutdown.
c. Power back ON the camera by connecting the Camera back with B+ line.
d. Once the device is powered back ON, observe the LED pattern, it should blink GREEN once every 15 seconds (implying that the device is running a proper trip with network connection). Please find the LED pattern details here and here for Jimi.